1.5" Wide Dual Purpose Negative Rake Woodturning Bowl Scraper Wood Lathe Chisel

Description

Hurricane Dual Purpose
Negative Rake Bowl Scraper
Think of it as
"A Woodturners Cabinet Scraper"
I'm selling this beefy 1.5"  wide long handled Hurricane HSS scraper chisel. It's a dual purpose negative rake round nose bowl scraper with a 2” side cut. It can be used inboard (bowls) or outboard applications. Both bevels are 40-degrees and in the center of the tool steel.
It’s an extra heavy duty scraper that is 3/8” thick and 1.5” wide that has not been used yet
. It's M2 HSS
.
This chisels cutting edge is a soft radius on the left side to conform better to the interior of bowls. the scraper has a some minor scuffs on the handle and tool steel. The cutting edge works best when the burr is used in the up position. Sharpen the scraper on either side for outboard or inboard turning. When turning with the scraper, make sure you use it with the burr in the up position.
The Burr cuts the cleanest, so
for best results
keep a good burr on the chisel when turning . I use a burnishing rod (
Arkansas hard ceramic stone
) to raise a burr several times before going back to the grinder.
You are bidding on and will get the chisel pictured.
Negative rake scrapers will cut the wood much cleaner than standard flat top scrapers, but will dull much faster. They are not a replacement for good tool technique. They are
not
a bulk wood removal tool. They’re a finesse tool used to clean up/touch up the interior or exterior of bowls or other turned projects by removing small micro lines, torn grain or making the final finishing or shaping cuts..
The scraper will cleanly cut very small amounts of wood leaving the surface ready for 180 to 220 grit sanding. They also work very well on plastics and acrylics cutting cleanly with a lot less chip-out. The scrapers also work very well on segmented
turnings
and stabilized materials.
Lastly, these negative rake scrapers don’t tend to get catches, very user friendly chisels. I personally have half a dozen of these types of chisels in different profiles in my own tool collection. Negative rake scraping is a technique dad and I learned from Stuart Batty. I’m told that it’s a very old technique that was used in the production of Ivory billiard balls in England.
A note on sharpening:
Use a good quality Aluminum Oxide wheel H, I, J hardness on the grinder and keep it dressed and clean. A dirty wheel won't raise a good burr. the softer wheels like the Norton ceramic jell wheels are what I ground this scraper on.
Please see the pictures for more information and condition as they are part of the description
A Note on Shipping Times:
I use the USPS for all my shipping. I’ve been checking the tracking on the items I’ve shipped and the USPS is taking twice as long for items to be delivered. The longest delay was 17 days for a 3-day priority mail package. Most are 6 to 8 days to complete the delivery. This is largely due to the carriers not scanning the packages when they pick them up. No scan, No tracking, slow delivery times.
Please be patient with the USPS.